fbpx
Artist d.o.o. - Muzički Instrumenti, razglasi, studijska oprema...

Pozovite nas

051 370 627
033 206 298

Akcija!

Behringer K-2 |Analog and Semi Modular Synth

665,00KM

U potpunosti analogni signalni put sadrži oscilatore debelog i masnog zvuka, pulsirajuće i agresivne analogne filtere i analogne envelope generatore.

SKU: 04055202 Kategorije: ,

Opis

Sa semi-modularnim sintesajzerom Behringer K-2 pridružiti ćete se u ljubiteljima dizajna klasičnih analognih uređaja i bit ćete spremni za integraciju sa drugim sistemima modularnih sintova. U potpunosti analogni signalni put sadrži oscilatore debelog i masnog zvuka (sa četiri varijabilna oblika vala), pulsirajuće i agresivne analogne filtere i analogne envelope generatore. Čak i ako nemate nijedan drugi modularni sint sa kojim biste ga povezali, K-2 je u samom startu spreman za akciju – ne morate provoditi sata i sate u patchingu, jednostavno ga povežite s nekim kontrolerom ili sekvencerom putem MIDI ili USB-a priključka. Sa 36 namjenskih prekidača za izravnu kontrolu i opcijom Poly Chain koja omogućuje lančano spajanje do 16 modula (!), Behringer K-2 semi-modularni sintisajzer predstavlja ogroman kreativni potencijal za sve koji se bave elektronskom muzikom bilo da komponuju ili eksperimentišu zvukom.

Synthesizer Structure Number of Voices: Monophonic
Type: Analog
Oscillators: 2 (16 Hz to 1.5 kHz at 8' and with 4 Overlapping Ranges)
LFO 1 (0.1 to 22 Hz)
VCF 1 Low Pass, 1 High Pass (24 dB/Octave Slope)
Envelopes VCA, VCF
Connectivity Power Input: DC Input Connector
Power Switch: Push Button On/Off
MIDI In and MIDI Thru: 5-Pin DIN
MIDI Channel Switch: Channel Selection / 16 Channels
USB (MIDI): USB 2.0, Type B

Outputs
Main Output: 1/4" / 6.35 mm TS, Unbalanced, Max. 0 dBu
Signal Out: 1/8" / 3.5 mm TS, Unbalanced, Max. 0 dBu
Outputs Impedance: 1.0 Kilohm
Headphones: 1/8" / 3.5 mm TRS, Max. +6 dBu
Headphones Output Impedance: 22 Ohms
USB Type: Class Compliant USB 2.0 Type-B
Supported Operating Systems:
Windows 7 or Later
Mac OS X 10.6.8 or Later
Controller Master Tune: -5 to +5
Portamento: 0 to 10
VCO Range (VCO 1): 32', 16', 8', 4'
Range (VCO 2): 16', 8', 4', 2'
Pulse Width (VCO 1): Square to Narrow
Waveform (VCO 1): Triangular, Reverse Sawtooth, Pulse, Noise
Waveform (VCO 2): Reverse Sawtooth, Square, Narrow Pulse, Ring
Pitch (VCO 2): -5 to +5

VCO Mixer:
VCO 1 Level: 0 to 10
VCO 2 Level: 0 to 10
VCF Voltage Controlled Filter
High-Pass Cutoff Frequency: 0 to 10 (10 Hz to 20 kHz)
Low-Pass Cutoff Frequency: 0 to 10 (10 Hz to 20 kHz)
High-Pass Peak (Resonance): 0 to 10
Low-Pass Peak (Resonance): 0 to 10
Filter Selector Switch: Filter 1/ Filter 2
Modulation Frequency Modulation (MG/T.Ext): 0 to 10
Frequency Modulation (EG1/Ext): 0 to 10
High-Pass Filter Cutoff Frequency Modulation (MG/T.Ext): 0 to 10
High-Pass Filter Cutoff Frequency Modulation (EG2/Ext): 0 to 10
Low-Pass Filter Cutoff Frequency Modulation (MG/T.Ext): 0 to 10
Low-Pass Filter Cutoff Frequency Modulation (EG2/Ext): 0 to 10
Modulation Waveform: Sawtooth Variation and Pulse-Width Variation
Modulation frequency: 0 to 10 (0.1 to 22 Hz)
LED: Modulation Frequency Rate
Envelope Generators Envelope Generator 1 Delay Time: 0 to 10 (0 to 5.5 s)
Envelope Generator 1 Attack Time: 0 to 10 (3.0 ms to 16 s)
Envelope Generator 1 Release Time: 0 to 10 (30 ms to 16 s)
Envelope Generator 2 Hold Time: 0 to 10 (0 to 14 s)
Envelope Generator 2 Attack Time: 0 to 10 (5.4 ms to 9 s)
Envelope Generator 2 Decay Time: 0 to 10 (0.5 ms to 15 s)
Envelope Generator 2 Sustain Level: 0 to 10
Envelope Generator 2 Release Time: 0 to 10 (40 ms to 18 s)
LED: Envelope Generator Action
External Signal Processor Controls
Signal Level: 0 to 10
Low-Cut Frequency: 0 to 10
High-Cut Frequency: 0 to 10
CV Adjust: 0 to 10
Threshold Level: 0 to 10

1/8" / 3.5 mm TS Input
Signal In: Auto Pad System

1/8" / 3.5 mm TS Outputs
Amplifier: -? to 0 dBµ
Band Pass Filter: -? to 0 dBµ
F-V Converter: 0 to +8 V
Envelope Follower: 0 to +5 V
Trigger Out: to GND

LED:
Peak Envelope Follower
Trigger Out
Inputs and Outputs Output Control: Volume 0 to 10
LED: Power

Patch Points

Sample and Hold
In: 5 V p-p
Out: 5 V p-p
Clock In: to GND

VCA
In: -5 V to +5 V
Out: -5 V to +5 V
Control Input: 0 to +5 V

Noise Generator
Pink Noise Out: 5 V p-p
White Noise Out: 5 V p-p

Trigger Switch Out: to GND

Trigger
In: to GND
Out: to GND

VCO
VCO 1+2 CV in: 0 to +8 V
VCO 2 CV in: 0 to +8 V
VCO 1+2 Frequency In: -3 V to +3 V
VCA Initial Gain: 0 to 5 V

Low Pass VCF Cutoff Frequency: -5 V to +5 V
High Pass VCF Cutoff Frequency: -5 V to +5 V
External Signal In: 3 V p-p
Total (Affects VCOs and VCFs) In: -5 V to +5 V
Keyboard CV Out: 0 to +8 V (Exponential)

Envelope Generator
EG 1 Out: 0 to +5 V
EG 1 Reverse Out: +5 V to 0
EG 1 Trigger In: to GND
EG 2 Out: -2.5 V to +2.5 V
EG 2 Reverse Out: -2.5 V to +2.5 V

Modulation Triangular/Sawtooth Waveform Out: 5 V p-p
Modulation Pulse/Square Waveform Out: 0 to +5 V
Switches Trigger Out, Momentary
Operating Temperature 41 to 104°F / 5 to 40°C
Power External Power Adapter: 12 VDC
Power Consumption: 12 W Maximum
Horizontal Pitch 80 HP
Dimensions (H x W x D) 3.7 x 16.7 x 5.4" / 9.5 x 42.4 x 13.6 cm
Weight 4.0 lb / 1.8 kg

Brand

Behringer

0
    0
    Vaša korpa
    Vaša korpa je praznaNastavite kupovinu
    Nastavite kupovinu